Powder mix in tank where the utensil and wares are soaked to remove the carbon.
The powder is an environmentally safe cleaning agent that is non-caustic, non-toxic, fully biodegradable, Specifically formulated for removal of completely carbon, grease, oil, and other heavy deposits.
Powder mix in tank where the utensil and wares are soaked to remove the carbon. The deposits are bind and trapped resulting to complete and safe removal.
CARBON cleaner is very active which eliminates the need for Scrubbing or Brushing which can cause mechanical damages to discs and result in poor performance
For removal of carbon deposits it must be used concentrated ,contained in a steel immersion bath.
SAFETY AND HANDLING:- Completely Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.
Depending upon the deposition either concentrated or diluted .If used diluted use 1 part concentrate to 2-10 parts of water to yield a very effective end product. The components parts are then dipped into the solvent / solution for 30 min. to 1 hr. Heavy deposition may need 12-24 hours , parts must be taken out from the bath and washed thoroughly with running water.
Carbon remover is most effective product in its category due to its quick and complete action. can be applied for cleaning of highly soiled components.
CHARACTERISTICS :-