Product code: RXSOL-54-1048-020
RXSOL Air Cooler Scale Dissolver
Technical Product Bulletin – Marine & Industrial Air Cooler Cleaning Chemical
Product Name: Air Cooler Scale Dissolver Brand: RXSOL Product Category: Industrial Descaling and Heat Exchanger Cleaning Chemical Chemical Type: Inhibited Acid-Based Descaling Solution Application: Marine Air Coolers, Heat Exchangers, Cooling Coils and Industrial Cooling Equipment
RXSOL Air Cooler Scale Dissolver is a specially formulated chemical cleaner designed for removing mineral scale, calcium deposits, rust stains and inorganic contamination from compatible air cooler components and heat exchange equipment.
The product combines scale-dissolving acids, wetting agents and corrosion inhibitors to penetrate and loosen deposits that reduce heat transfer efficiency and restrict airflow or fluid circulation.
It is suitable for selected marine and industrial cooling equipment, subject to compatibility with the construction materials.
Important: Air coolers may have aluminium fins, copper tubes, galvanized surfaces or stainless steel components. The appropriate cleaning chemistry must be selected according to the metallurgy. Conventional acidic descalers must not be used indiscriminately on aluminium or galvanized surfaces.
Air Cooler Scale Remover Cleaner Sea Water SIDE is specialized product to dissolve water scale smoothely. We are manufacturer and supplier of Air Cooler Cleaner Sea Water SIDE.
Application
Applications
|
Equipment |
Application |
|---|---|
|
Marine Air Cooler |
Removal of mineral deposits from compatible components |
|
Heat Exchanger |
Cleaning calcium carbonate and scale deposits |
|
Cooling Coil |
Removal of inorganic fouling |
|
Condenser |
Descaling of compatible water-side surfaces |
|
Chiller |
Removal of mineral scale from suitable circuits |
|
Industrial Cooler |
Restoration of heat transfer affected by scaling |
|
Cooling Water Pipeline |
Removal of mineral deposits |
RXSOL-54-1048-020 is mixed with fresh water 3 to 20 percent depending on deposition of scaling.
If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser RXSOL-10-1005. RXSOL-54-1048-020 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-54-1048-020 ,
PRECAUTION :::it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of RXSO-20-2005 in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.
Dosage
Recommended Dilution and Application
|
Scale Condition |
Initial Trial Concentration |
|---|---|
|
Light Scale |
5–10% product in water |
|
Moderate Scale |
10–20% product in water |
|
Heavy Scale |
20–30% product in water, subject to compatibility |
After using RXSOL-54-1048-020, sense all metal surfaces with 0.5 percent of RXSOL-10-1005, at least 2-4 hour , up to neutral of PH value.
• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc
Why Use RXSOL Descaler?
- It is a safe , economical concentrated chemical to be used on the waterside of heat transfer equipment.
-
You do not have to heat RXSOL-54-1048-020 .
RXSOL-54-1048-020 is safer for the employees to use than other acid products. -
Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
- Cleans down to the original surface without pitting.
- RXSOL-54-1048-020 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
- RXSOL-54-1048-020 will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
-
Removing the scale build up allows your equipment to operate more efficiently with less down time.