Product code: RXSOL-16-1093-025
Super Degreasing power with surfactants which eliminates Cleaning Degreasing and rust removal from electrical equipment.
Excellent Cleaner for Electric Parts
Electrocleaner
A well balanced blend of non-chlorinated degresol ( Having super Degreasing power ) with surfactants which eliminates Cleaning Degreasing and rust removal from electrical equipment.It provides immediate and efficient removal with a high evaporation rate.
Electrocleaner is a specially formulated cleaning and degreasing agent designed for the maintenance of electrical and electromechanical equipment. It combines high-performance non-chlorinated solvents with selected cleaning agents to provide rapid removal of oil, grease, and accumulated contaminants.
The product penetrates and loosens oily deposits, helping restore clean surfaces on suitable electrical components. Its fast-evaporating solvent system minimizes residual solvent after application, reducing the need for manual wiping on accessible surfaces.
Electrocleaner is suitable for use in industrial maintenance workshops, electrical service facilities, marine applications, and equipment maintenance operations.
Application
RXSOL-16-1093-025 must be used in open or sufficiently ventilated areas. RXSOL-16-1093-025 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1093-025. Never use RXSOL-16-1093-025 on a running generator or motor. RXSOL-16-1093-025 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.
Where to use ELECTROCLEANER Electrical Parts Cleaner?
- Cleaning suitable motor housings, metal parts, and accessible components during maintenance.
- Removal of oil and dirt from compatible, isolated electrical equipment.
- Cleaning suitable connectors, terminals, relays, and other components after compatibility testing.
- Degreasing suitable electrical and electromechanical parts in ship engine rooms, workshops, and industrial facilities.
Dosage
Never use RXSOL-16-1093-025 on a running generator or motor.
Never Dilute RXSOL-16-1093-025 with other solvent.
For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment.
Small Parts and components may be cleaned by DIP BATH of RXSOL-16-1093-025
How to clean Electrical Parts easily- remove GREASE, DIRT easily from ELECTRICAL PART?
- Switch off and isolate equipment. Disconnect the power supply, follow lockout/tagout procedures, and verify that the equipment is de-energized.
- Inspect the component. Identify the contaminants and check the compatibility of the cleaner with insulation, plastics, rubber, coatings, and other materials.
- Apply Electrocleaner. Spray or apply a controlled quantity directly onto the contaminated surface using suitable application equipment.
- Allow cleaning action. Let the solvent dissolve and loosen the oil and grease. Use a soft, compatible brush where necessary.
- Remove contamination. Allow loosened contaminants to drain or wipe them away using a clean, lint-free cloth. Avoid spreading dissolved contaminants into sensitive components.
- Allow complete drying. Ensure all solvent has evaporated and fumes have been adequately ventilated before restoring power.
- Inspect before operation. Confirm that the component is clean, dry, and free from residue before returning it to service.