Categories: Oil Spill Chem & Absorbent -17
Product Short Description:

This product is specially designed for complete emulsification of oil by which dispersion takes place .

Product Description:

Oil Spill Agent Type 3:

Oil Spill Agent Type 3 – Advanced Solution for Effective Marine Oil Spill Cleanup

Oil spills in marine and industrial environments pose serious risks to the environment, marine life, and operational safety. Quick response and effective treatment are essential to minimize damage. Oil Spill Agent Type 3 is a high-performance dispersant specifically designed for rapid oil spill control and cleanup in seawater and offshore environments.

Product Application:

What is Oil Spill Agent Type 3?

Oil Spill Agent Type 3 is a concentrated chemical dispersant formulated to break down oil slicks into microscopic droplets, allowing faster natural biodegradation. It is widely used in marine oil spill emergencies, offshore platforms, ports, harbors, and shipping operations.

This type of oil spill treatment agent is highly effective on:

  • Crude oil

  • Diesel oil

  • Fuel oil

  • Lubricating oils

  • Bunker oil spills

Its specialized formulation ensures efficient dispersion even under harsh marine conditions.

Why Use Oil Spill Agent Type 3?

When oil spills occur, they create a floating layer that:

  • Blocks oxygen transfer in water

  • Harms marine ecosystems

  • Pollutes coastlines and ports

  • Creates fire hazards

  • Violates environmental regulations

Using Oil Spill Agent Type 3 helps disperse the oil quickly, reducing the spread and impact of contamination.

Product Dose:

How to Use Oil Spill Agent Type 3

  1. Identify the spill area and oil type.

  2. Spray the dispersant directly onto the oil slick.

  3. Use natural wave action or mechanical agitation to improve dispersion.

  4. Allow the product to break down the oil into smaller droplets.

  5. Monitor the area until effective cleanup is achieved.

For best performance, apply immediately after the spill occurs.

Why Choose Our Oil Spill Agent Type 3?

Our Oil Spill Agent Type 3 is specially developed for high-efficiency marine oil spill response. Its powerful dispersing action, easy application, and environmental performance make it a trusted solution for shipping companies, ports, and offshore industries.

Product Note:

Biodegradable and having low toxicity . Self –life 5 YEARS( from mfr. date ) .

HIGH – Emulsification rate Converts hydrocarbons particle  in to  very fine emulsions.Ready to use product. Suitable for Crude  / Bitumen / Residual  / Diesel / Kerosene, White spirit  & Lube oils etc .Effective  on oil spills at platefoprm , during loading or discharging of  cargo  or bunkers .For cleaning of spills on Deck, Ships side, Piers, Wharfs, etc. where allowed .
 

Oil spills at sea, harbours, beaches, or on land. Can also be used in industries.

RXSOL-17-1047-210 is particularly effective over a broad range of oil spill conditions especially in areas which require exceptionally low toxicity. These include

 

  • Floating oil on harbours, coastal water and inland waterways.
  • Oil spills on ship decks, docks, piers beaches and land.
  • Oil accumulation on pilings and dock support structures.

 

 

It is designed to quickly and easily disperse and eliminate the risk of pollution, fire and slippery hazards caused by the accidental spillage of oil.

 

Application:

 

RXSOL-17-1047-210 is ready for application directly from the barrel land can applied by pressure spray ejector nozzle jet, mopping or brushing in to oily surfaces.

 

Spraying :

 

For oil spills on water, decks, docks and beaches the most economical results are obtained by the following procedure :

 

  1. Thoroughly wet the oil by spraying OIL SPILL DISPERSANT Type III through a pressure device.Keep the spray moving in a progressive pattern so as to avoid washing the product.
  2. Allow the OIL SPILL DISPERSANT to combine with the oil for 15 to 30 minutes.
  3. Then emulsify the mixture by agitating it with a fire jet spray of salt or fresh cold water. On water the propeller action of a launch is also effective for agitating the mixture. (Agitation is most important for efficient usage).

 

Ejector Nozzle Jet :

 

For large oil spills which must be dealt with quickly. It is advisable to use an ejector nozzle attached to a fire house. The ejector nozzle draws the OIL SPILL DISPERSANT Type III into the jet stream when is then directed at the oil-spill in a progressive pattern. The force of the jet ensures agitation.

 

 

 

Mopping & Brushing :

 

If spraying equipment is not available or for small spills on ships decks, docks, and piers the following method can be used. Pour OIL SPILL DISPERSANT Type III on the oil spill and mix thoroughly with a mop, broom or brush. Then add salt water or fresh water and continue mixing. When the oil is completely emulsified, nose with water. Also for removing accumulations of oil from pilings and dock support structures scrubbing with a large stiff brush may be necessary after first trying the spray method.

 

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates