Product code: RXSOL-81-8155-025
It is composed of chelating, detergent, dispersant and pretreatment filming agent.
Nonstop Cleaning Agent is a concentrated product. SLUDZA (Nonstop Cleaning Agent). This product is safer for use, storage and transportation and reduce your costs by 10 - 15%. This product dissolve and loosen deposits of SLUDGE and increase the permeability layer zones to mix with water.
This is a very strong polymer based cleaner which can be used to soften up / remove baked on drying oils. It is low toxic product with an exceptional solvency power on soil & oily matter. Suitable for cleaning of Heavy oils, Black oil, Mineral oil Products. Phthalates paraffin's vegetable oils Odour intensive products.
Main feature of this product is It finally dissociate slop emulsion to separate oil and water .This provide us with ability to dispose of waste solution. Improper use or dilution may result in a decrease in product performance. Ready-to-use neutral cleaner is designed to clean washable hard surfaces.
Application
- Can be use with high pressure machine
- Also can be use with a flat mop.
- can be use with mop and bucket.
- Can be use with auto scrubber
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic. , Non-flammable.
- Free from hydrocarbon solvents.
- SLUDZA has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals. Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing
- Contains wetting agents. Personal Protective Equipment (PPE) Recommendation:
Refer to MSDS for specific PPE guidance.
Dosage
Ready-To-Use:
Necessary concentration in water only 0,2 to 0,4 % Oil and Sludge remover
SLUDZA is also recommended for local cleaning & degreasing of engine rooms, bilges & tank tops. It may be applied by brush, spray, immersion, soaking, or any other conventional means. SLUDZA is used neat. Allow a residence time of at least 20- 45 minutes where possible, to ensure good penetration & emulsification. Finally wash the system with hot water & high pressure.The emulsion residue after cleaning must be allowed to separate in a holding tank for atleast 3-5 hours before passing through an oily water separator.
1. Sweep or dust mop floors.
2. Properly position caution signs for wet floor conditions.
3. Mop floor or scrub using an auto scrubber or floor machine
4. Pick up soiled solution with a wet vacuum or tightly wrung mop.
5. No rinsing required.
6. Allow floor to dry. Note: Floors may be slippery when wet.
7. Burnish or spray-buff immediately after cleaning (optional).
Special Features
- Automatic dispensing eliminates measuring and mixing and ensures accurate dilutions.
- Will not dull or damage floor finishes.
- Clean, fresh scent.
- No rinsing is required, saving time and labor.