Product code: RXSOL-37-1003-025
Thermic Fluid Carbon Cleaning Chemical is a Solvent based Heavy-duty carbon cleaning chemical to dissolves carbon to used as a thermic fluid carbon cleaning chemical. Removes all the carbon deposits inside the system.
Thermic Fluid Carbon Cleaning Chemical is a Solvent based Heavy-duty carbon cleaning chemical to dissolves carbon to used as a thermic fluid carbon cleaning chemical. Removes all the carbon deposits inside the system.
Specifically formulated for removal of completely carbon buildup, grease, oil, varnishes and other heavy deposits from diesel engine. Its unique combination effectively remove carbon deposits, varnish, gummy matter, baked / burnt on grease deposits and all persistent with high solvency and penetrating capabilities to remove carbonaceous residue formed by fuel engine part. RXSOL-37-1003-025 is a highly concentrated Wetting Emulsifying Agent which makes this product water soluble.
Main feature is Quickly dissolves deposits containing carbon, resins or varnishes; Eliminates need for hard scraping; Non flammable
This powerful action is based on a two –Layer mechanism. The top-layer prevents the evaporation of the volatile components in the button-layer. The button –layer removes the deposited substances. This way, the deposits are bind and trapped resulting to complete and safe removal.
CARBON cleaner is very active which eliminates the need for Scrubbing or Brushing which can cause mechanical damages to discs and result in poor performance ( This product is WATER SOLUBLE )
Our Other Valuable grade of CARBON REMOVER :::
A)Decarbonizer Predator Carbon Cleaner Part No. - RXSOL-16-1699-025 ::: Fast Effective Liquid degreaser and decarbonizer, Its immediate action of solvent makes it very popular and easy to use. Plesant Smell based and its specialization is water-rinseable gives complete cleaning effect. ( This product is WATER INSOLUBLE )
B) Carbon Remover LT Part No.- RXSOL-16-1075-025 ::: is a non-corrosive, powerful solvent for removal of carbonaceous deposits. Carbon Remover LT contains no chlorinated solvents or phenolic compounds and has low toxicity to the environment and to persons handling it. ::: ( This product is WATER INSOLUBLE )
Thermic Fluid Carbon Cleaning Chemical is a proprietary cleaning agent specifically formulated to suspend & dissolve sludge deposits that can reduce flow & efficiency in larger continuously operated systems. This unique additive formula cleans the system while it runs,
Application
USED TO REMOVE HARD CARBON FROM THERMIC FLUID BOILER / HEATER
Solvent based Heavy-duty carbon cleaning chemical helps to dissolves carbon, resin, and varnish deposits quickly. RXSOL Carbon Remover breaks quickly combustion products from fuel heater, oil bath, highly soiled components. blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder etc.
For removal of carbon deposits it must be used concentrated ,contained in a steel immersion bath.
SAFETY AND HANDLING:- Completely Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.
carbon remover can dilute with water to makes it economical
carbon remover msds available on request
Its formulation makes it to use as a hard carbon remover
Also very effective to use as a baked carbon remover
carbon deposit remover is very effective to clean diesel engine parts, without scrubbing and harrashing original surface. due to its uniqunness kept this materials in best carbon removal agent
carbon deposit cleaner loosen hard deposit by emulsifying and pentrating formula.
carbon remover solvent is water missicible in nature.
Typical Industrial Use of Thermal Oil Cleaner for Heat Transfer Systems
- Asphalt Processing & Storage
- Engineered Wood & Building Materials
- Chemical Processing
- Industrial Drying Processes
Dosage
- Install a 60-mesh screen in the Y-strainer to catch any large lumps that break loose.
- Drain the equivalent amount of fluid from the system before adding Thermal System cCleaner.
- Suggested treat rate is 3-12% of system volume (to be mixed with mineral oil/thermal fluid), depending on the degree of fouling. System cleaning should be preceded by analysis of the fluid to confirm suitable treat rate.
- Add Thermal System Cleaner RXSOL slowly using a positive displacement transfer pump and hoses of appropriate temperature range. Either pump Thermal System Cleaner RXSOL cleaner liquid directly into system (near pump suction if possible) or pump into expansion tank and drain into system.
- Allow cleaner to circulate until all loops are at operating temperature. Run system normally.
- Minimum suggested circulating time is 3 weeks, maximum time is 1 year.
- Clean Y-strainer screen as necessary for duration of cleaning cycle.
- To drain cleaner and fluid, shut off heater but allow pump to circulate until system temperature is cool enough to handle (<200°F). Do not turn off pump and allow system to cool as this will permit particles to settle out and contaminate the new fluid.
- Drain system with pump running. Continue to run pump until it begins to cavitate or the low-pressure switch shuts it off.
- Continue draining as quickly as possible. Any delay will allow sludge to settle out in the piping where it will contaminate the new fluid.
- Fill system with a compatible brand and restart system normally.
- One week after startup, send sample to fluid supplier for testing.