Categories: Railway Maintenance-35
Product Short Description:

Rust Remover is acceptable for use as an acid cleaner (A3) in

Product Description:

DERUSTING SOLUTION is a Liquid  Acid, Surfactant, and Corrosion Inhibitor based product primarily designed to simultaneously clean and remove rust from steel and iron parts. This product is also effective in removing flux, heat scale and other oxides from steel, stainless steel, cast iron and aluminium in immersion and hand-wipe cleaning applications. 

Product Application:

DERUSTING SOLUTION  is also suitable for preparing steel and aluminium surfaces for painting in immersion (Vat) or hand-wipe applications.  Use of DERUSTING SOLUTION for cleaning, rust removal or pre-paint preparation must be followed with a fresh water rinse and drying. If used prior to painting, parts should be painted after the drying step.

For parts cleaning, rust removal and surface preparation prior to painting in automotive and industrial applications.

Product Dose:

Equipment : 

Customer Owned Machines Immersion (other common terms - Vats, Dip Tanks, Hot Tanks).

Note: Tanks (Vats) should be made of stainless steel (304, 316, or 347), ceramics or other acid proof materials. Heating elements should be made of stainless steel, impervious carbon or graphite. Do not use Monel equipment, lead or rubber lining in tanks.

Soils : 

Light to moderate grease and oil. Light to heavy rust, heat scale, flux, and other oxides.

Operating Instructions:

Immersion: Use 5% to 25% volume with water at room temperature to 160ºF. Follow the cleaning step with fresh water rinsing and drying. The higher the concentration and heat, the faster the rust removal. Immersion time depends on the degree of soil and amount of rust to be removed. Hand Wipe: Use 10% to 50%/volume added to water at room temperature to 120ºF. Apply with clean rags, wipes or brushes. Allow the Rust Remover to soak on part surfaces for several minutes before wiping or brushing for improved results. Follow with fresh water rinsing then dry the parts.

*Note: Use acid resistant gloves and safety glasses when handling this product. Refer to the
product MSDS for complete safety instructions.

Product Note:

Titration Procedure (insert “Information”)

    1. Using a pipette, take a 5 ml sample of Rust Remover from the cleaning bath
    2. Put the 5 ml sample into the mixing flask
    3. Add 10 ml of water then stir well to mix
    4. Add 5 drops of phenolphthalein indicator
    5. Counting the drops added, add 10N Sodium Hydroxide one drop at a time until the solution turns from clear to purple. Swirl between drops. The number of drops needed is the concentration of the Rust Remover.

    Precautions : 

    ƒ Not intended for spray use.
    ƒ Do not use or mix with chlorine containing cleaners or solutions as chlorine gas can be released.
    ƒ Will gradually attack steel tanks, heating elements and piping
    ƒ This product is highly acidic. The product concentrate causes burns of the eyes and may cause burns of the skin.

                   Future 

                                     Benefit

    Single-step process

    : Does not need separate cleaning step prior to rust removal

    Versatile

    : Effective on a variety of metals and soils

    Effective

    : Quickly removes rust and other oxides from metal surfaces.

    Flexible

    : Use Can be used in immersion and hand-wipe applications.

    No VOC

    : No VOC permits required

    Mild Odor

    :  Minimal irritation to operators and other employees

    Handling : 

    Keep away from sparks or flame. Do not breathe dust or vapors. allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection.Wash thoroughly after handling. Acid reacts with water and can splatter acid onto personnel. When diluting, cautiously mix product and water together while stirring

    Storage : 

    Store containers in a cool, dry place. Do not pressurize, cut, weld, braze, solder, drill, or grind containers. Keep containers away from heat, flame, sparks, static electricity, or other sources of ignition.

    Free Delivery / Supply Locations : 
    Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates