Cold clean wash specialized degreaser and tank cleaner which is safe for common tank metal and epoxy and zinc silcate coating.
Cold clean wash specialized degreaser and tank cleaner which is safe for common tank metal and epoxy and zinc silcate coating. Cold wash is excellent for use as a wash for fuel tankers and heavy mineral oils and fats. This is a Heavy duty and highly concentrated tank cleaner.
Ready to use for tank cleaning or general degreasing.
Complete removal of dirt, oil, carbonized grease, heavy oil, gum, vegetable oil, Lube oil, soot, asphalt, paraffin, carbon stains etc. Gives clear finish to the surface. Highly effective for the removal of crude and other high melting point stains.
PROEDURE OF USE :
SPRAY METHOD
Mix 1 part of RXSOL-20-2003-CW with 2 -10 parts of water / GAS-OIL ( For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minted of spray the RXSOL-20-2003-CW starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water
Immersion Method
Application in immersion process with or without ultrasonic support, manual wipping.
RE-circulation Method
RXSOL-20-2003-CW is also used in conjunction with alkaline degreasing bath at 2-10% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70°Cor the solution can be stirred or air agitated. FINALLY RINSE THE SYSTEM WITH FRESH WATER.
Advantages :
RXSOL-20-2003-025 is easily soluble in water Action is quite fast even at low temperature which gives advantages of cleaning under operation And avoid shut down and down time.Non corrosive to most of the metals / plastics. Gives clear finish to the surface .Lower cost due to high concentration