Your shopping cart is empty.
Powerful rust cleaning and surface brightening agent. RXSOL powerful and fast chemical reaction easily restore original luster and glow to all metals surface.
Metalic Brightner Metal shining and rust cleaning detergent chemicals Powerful rust cleaning and surface brightning agent. RXSOL powerful and fast chemical reaction easily restore original luster and glow to all metals surface.
It's heavy duty and concentrated formula easily dissolves rust and makes popular for ships and marine industries. And RXSOL-20-1011-025 is very common to use as rust remover before paint coatings application as well as for tank surface cleaning agent.
RXSOL-20-1011-025 is non-flammable and prevents further rusting. Our long experience in this product gives opportunity to maintain equilibrium position of liquid blend of surfactants & organic compounds containing rust penetrating agents, solubilizer and inhibitors.
Our working policy is to provide best rate with maximum possibilities of concentration. At present we are maintaining full stock of this product at all INDIAN - UAE coastal area.
MARINE - Rust Stain cleaner Metalic brightner ( foaming nature )
RXSOL-20-1011-025 ( Metalic Brightener-Rx ) can be used as a spot cleaner after cleaning fats and fatty acids , can be used on painted surface
A superior heavy duty and highly Concentrated liquid blend of surfactant & organic compound containing rust penetrating agent, solubilizer and inhibited phosphoric acid with ionic and non ionic emulsifier.
FOR TANK CLEANING
RECOMMENDATION : 0.2% TO 100%
It can be used via the dipping, brushing or wipe-on methods.
FIELD :-
specially designed for removal of rust from any steel surface area and rust stain from Brass, Copper, S.S wood, ceramic and aluminium surfaces, painted or not . And act as surface brightner.
Procedure for Use :-
For stubborn rusted stains: For steel surfaces; remove oil, grease and old paint. Wet down entire surface with neat Metal Bright- Rx and allow to dry. The second wash may be necessary. The surface should have a grey/white appearance when the Metal Bright- Rx is dry. Steel surfaces will have a resistance to rust and will render a good base for paint.For removal of rust stains on painted surfaces and wood, Metal Bright Rx should be applied at full concentration for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.
Spraying Direction :-
Using an empty / clean 210 liter drum, fill with 190 liter of fresh water and add 20 liters of Metal Bright Rx This makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas. Once spraying is completed, wait 20-30 minutes and fresh water rinse with lots of water, if possible use butterworth machines for a more efficient result. This method can be used in stainless tanks to “freshen up” the look of the stainless materials. Make sure to rinse the tank very well, as residual detergent within the Metal Bright Rx will show up in a Wall Wash.
Injection – Not suitable.
Re-circulation:–
When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50o C, then circulate the solution through Butterworth machines for 3 x 45 minutes drops minimum. When using fixed machine recirculate for a minimum of 3 cycles. Rinse out the tank using hot seawater 85o C for 2 hours making sure that there is no form remaining in the water at the pump stack drain cock. After the hot wash, the tank must be rinsed with fresh water and dried.
* If the mixture is allowed to overheat, it will soften epoxy/phenolic coating.
* Use a strainer at the pump stack when circulating any solution.
Tank Lining – Stainless / Epoxy, Phenolic
specially designed for removal of rust from any steel surface area and rust stain from Brass , Copper , S.S wood , ceramic and aluminium surfaces , painted or not . And act as surface brightner.
Note :-
When cleaning aluminium, brass & copper flush with water upon completion of cleaning immediately Warning : In case of contact with skin , wash immediately with plenty of water. Use chemical resistance PVC gloves for skin contact and also use face mask for eye and face protection.
Read the Material Safety Data Sheet before using this products.