Categories: Tank Cleaner-20
Product Short Description:

Rust Stain cleaner Metalic brightner ( foaming nature )

Product Description:

MARINE - Rust Stain cleaner Metalic brightner ( foaming nature )

RXSOL-20-1011-210 ( Metalic  Brightener-Rx ) can be used as a spot cleaner after cleaning fats and fatty acids , suitable to used on painted surface area.

Powerful rust cleaning and surface brightning agent. RXSOL powerful and fast chemical reaction easily restore original luster and glow to all metals surface.  

It's heavy duty and concentrated formula easily dissolves rust and makes popular for ships and marine industries. And RXSOL-20-1011-210 is very common to use as rust remover before paint coatings application as well as for tank surface cleaning agent.

RXSOL-20-1011-0210 is non-flammable and prevents further rusting. Our long experience in this product gives opportunity to maintain equilibrium position of liquid blend of surfactants & organic compounds containing rust penetrating agents , solubilizer and inhibitors.

 

Our working policy is to provide best rate with maximum possibilities of concentration. At present we are maintaining full stock of this product at all INDIAN - UAE coastal area. 

Product Application:

A superior heavy duty Rust Stain tank cleaner which is highly Concentrated liquid blend of surfactant & organic compound containing rust  penetrating agent,   solubilizer  and inhibited phosphoric acid with ionic and non ionic emulsifier.

Also acts as rust cleaning and proofing agent as well as removes corrosion of all metals before the application of paint or coatings. It is non-flammable. Prevents further rusting. Also acts as spot cleaner after cleaning fats and fatty acids.

Product Dose:

FOR TANK CLEANING

RECOMMENDATION : 0.2% TO 100%
 

FIELD :-
specially designed for  removal of rust from any steel surface area and rust stain from Brass , Copper , S.S wood , ceramic and aluminium surfaces , painted or not . And act as  surface brightner.

Procedure for Use :-

  • RXSOL-20-1011-210 is highly concentrate
  • Dilute in water (always use plastic jar and RXSOL-20-1011-210 should be added to  water  never add water to (RXSOL-20-1011-210.)
  • Surface should be sound clean and free from oil, grease, dirt etc.
  • Diluted materials apply on rusted area for 15 to 20 minutes then wash off with water repeat if necessary. Metalic Brightner HD
    (For stubborn rusted stains.)

NOTE :-
For steel surfaces; remove oil, grease and old paint. Wet down entire surface with neat Metalic Brightner HD and allow to dry. Second wash may be necessary. Surface should have a grey/white appearance when the Metalic Brightner HD is dry. Steel surfaces will have a resistance to rust and will render a good base for paint.For removal of rust stains on painted surfaces and wood, Metalic Brightner HD should be applied at full concentration  for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.

Spraying Direction :-
Using an empty / clean 210 liter drum, fill with 190 liter of fresh water and add 20 liters of Metalic Brightner HD  This makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas.  Once spraying is completed, wait 20-30 minutes and fresh water rinse with lots of water, if possible use butterworth machines for a more efficient result.  This method can be used in stainless tanks to “freshen up” the look of the stainless materials.  Make sure to rinse the tank very well, as residual detergent within the Metalic Brightner HD  will show up in a Wall Wash.
Injection – Not suitable.

Re-circulation :
When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50o C, then circulate the solution through butterworth machines for 3 x 45 minutes drops minimum.  When using fixed machine recirculate for a minimum of 3 cycles.  Rinse out the tank using hot seawater 85o C for 2 hours making sure that there is no form remaining in the water at the pumpstack drain cock.  After the hot wash, the tank must be rinsed with fresh water and dried.

* If the mixture is allowed to overheat, it will soften epoxy / phenolic coating.
* Use a strainer at the pumpstack when circulating any solution.

  Tank Lining – Stainless / Epoxy, Phenolic

Product Note:

specially designed for  removal of rust from any steel surface area and rust stain from Brass , Copper , S.S wood , ceramic and aluminium surfaces , painted or not . And act as  surface brightner.
 

Characteristics :-

  • Non-flammable.
  • Prevents further rusting.
  • Economical  , cost effsctive.
  • Surface brightening
  • Protects and maintains from corrosion
  • Acts as rust proofing agent before the application of paints or coatings.
  • It doesn’t  affect rubber and plastic compounds
  • removes corrosion of all metals
  • excellent cleaner to remove contamination of fats and salts Marine application for trains, busses, tank containers and ship tanks
  • odourless, so it can be used in enclosed space
  • suitable for manual cleaning as well as high- and low pressure systems

Note :-
When cleaning aluminium, brass & copper flush with water upon completion of cleaning immediately Warning : In case of contact with skin , wash immediately with plenty of water. Use chemical resistance PVC gloves for skin contact and also use face mask for eye and face protection.

Read the Material Safety Data Sheet before using this products.

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates