Categories: Drilling Fluids & Mud Oil Field chemicals-81
Product Short Description:

Hydro-testing corrosion protection for Pipeline, Tank contains corrosion inhibitor, oxygen scavenger and biocide

Product Description:

Hydro Testing Corrosion Inhibitor RXSOL 4000 is a multicomponent, multifunctional formulation which prevents corrosion, microbiological growth in single product treatment programme. Inhibitor, corrosion, multicomponent, multifunctional: For prevention of corrosion and microbiological growth in water flood systems during hydrostatic testing and other applications.

Product Application:

PERFORMANCE:

CORROSION: Effectively prevents corrosion due to Carbon Dioxide, inorganic salts, dissolved oxygen & Hydrogen sulphide contamination from sour fluid or bacterial action. The inhibitor acts as a cathodic polarizer

 

MICROBIOLOGICAL GROWTH: Effectively prevents the metabolic function necessary for reproduction of the bacteria cell. Successfully prevents anaerobic/aerobic and sulphate reducing bacteria.

Product Dose:

Hydro Testing Corrosion Inhibitor RXSOL  can be fed directly or through chemical doses pump. Doses may vary with the quality of water to be treated and the residence time of the water in the system.

Actual consumption is determined under operating conditions.

Recommended Dosage of Hydro Testing Corrosion Inhibitor RXSOL 4000

Hydro Testing Corrosion Inhibitor RXSOL 4000 dosage levels typically are 500ppm for hydrotest operations and between 1000- 4000 ppm when used as a packer fluid inhibitor. The exact dose rate for a specific job would depend on the environment and fluid that the chemical was being deployed into. We are happy to advise on this if required.

Product Note:

Benefit  / Advantage of Hydro Testing Corrosion Inhibitor RXSOL 4000

  • Hydro Testing Corrosion Inhibitor RXSOL 4000 is a liquid multifunctional chemical designed to completely treat hydrostatic test fluid, saltwater packer fluid, saltwater drilling fluid, during Hydro-testing and oil field water injection programme.
  • Hydro Testing Corrosion Inhibitor RXSOL 4000 contains an effective filming corrosion inhibitor, oxygen scavenger and biocide, altogether in a single formulation convenient to dose with single chemical injection pump or skid.
  • Hydro Testing Corrosion Inhibitor RXSOL 4000 is economical to use as handling is limited to one chemical.
  • Rapidly kills Sulphate Reducing (SRB) as well as other offending bacteria that give rise to Microbial Influenced Corrosion (MIC)
  • Mitigates against acid corrosion resulting from residual low pH of surface waters

 

 

How to use Hydrotesting Corrosion Inhibitor Oxygen Scavenger Biocide RXSOL-43-4035-210

Corrosion inhibitor shall be dosed in the displacement water piping at the suction of main pump/ booster pump

Dose 2 to 3 ltr per 100 ltr water.

Contact time: Minimum 24 hours for effective passivation + biocidal effect

Temperature: Ambient to 50°C (higher temp improves kinetics but not essential)

Mixing: Ensure thorough circulation to distribute inhibitor uniformly

Water quality: Ideally should be low hardness and low chloride (<50 ppm Cl⁻ preferable)

Oxygen level: Target <1 ppm dissolved oxygen after treatment (check with DO meter if possible).

 

Flushing: After test, flush system thoroughly to remove chemicals.

 

When to consider HIGHER DOSAGE of RXSOL Hydrotesting Corrosion Inhibitor?

However if you are considering higher dosage, it should be under following conditions:
If hydrotest duration exceeds 7 days OR If high temperature (more than 50°C) - use 3% - 4% v/v

 

Additional points to take care:

  • For high chloride hydrotest conditions, additional passivators are needed which are in-built in HydroTech 3670 RX.
  • After hydrotest, thoroughly flush the system to remove residual chemicals
  • Always monitor pH and oxygen scavenging effectiveness onsite
Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates