Your shopping cart is empty.
The main components of the product and mode of scale anti scalant pH control calcium masking.
RXSOL RO Scale Inhibitor is a high performance, reverse osmosis scale inhibitor scientifically formulated for the treatment and protection of reverse osmosis membranes. It can also be used as a highly efficient water softener resin cleaner and on-going preventative treatment for water softeners. RXSOL RO Scale Inhibitor offers an array of performance benefits where scale and iron fouling problems are encountered in RO systems and water softeners.
Historically scale and deposits build up on the RO membrane leading to poor permeate quality and low permeate production, this coupled with un-planned downtime and increased water and energy costs, the result has been premature RO membrane replacement.
RXSOL RO Scale Inhibitor is based on phosphonates for solubilising iron contamination of sodium ion exchange softener resin beds. It can be used either as a preventative treatment or as a resin cleaner for use in water softeners.
RXSOL RO Scale Inhibitor is a high performance, reverse osmosis scale inhibitor scientifically formulated for the treatment and protection of reverse osmosis membranes. It can also be used as a highly efficient water softener resin cleaner and on-going preventative treatment for water softeners. RXSOL RO Scale Inhibitor offers an array of performance benefits where scale and iron fouling problems are encountered in RO systems and water softeners.
RXSOL RO Scale Inhibitor is dosed continuously into the feedwater prior to the membrane systems at typical dose rates of 3-6 mg/L depending on water chemistry and system conditions. Our technical consultant will advise you of the correct dosage for your individual system.
It is recommended to operate the dosing pump with the highest possible frequency and to adjust the dosage by adjusting the pump stroke to ensure membrane protection.
RXSOL RO Scale Inhibitor has the added advantage of using RO permeate for dilution, with a fresh solution made every 3-5 days.
Dosage rate for RXSOL RO Scale Inhibitor in ion exchange softener resin beds, 1/3 litre per 25kg salt added to the salt tank.RXSOL RO Scale Inhibitor is dosed continuously into the feedwater prior to the membrane systems at typical dose rates of 3-6 mg/L depending on water chemistry and system conditions. Our technical consultant will advise you of the correct dosage for your individual system.
RXSOL RO Scale Inhibitor is a super-threshold agent delivering proven high performance against several problem scales including:
RXSOL RO Scale Inhibitor also stabilises a wide range of super-saturated salt solutions, thereby preventing precipitation on the membrane surface.
This proprietary formulation eliminates the use of hazardous acids, resulting in efficient plant operation with the highest possible conversion rate and offering a more cost effective alternative for reverse osmosis membrane protection than simple pH control or ion exchange softening.
The superior results achieved by RXSOL RO Scale Inhibitor allow engineers to design RO systems to successfully operate at higher recovery rates, giving a significant market edge.RXSOL RO Scale Inhibitor is a super-threshold agent delivering proven high performance against several problem scales including:
Calcium Carbonate
Calcium Sulphate
Barium Sulphate
Strontium Sulphate
Calcium Fluoride
Silica and Iron
RXSOL RO Scale Inhibitor also stabilises a wide range of super-saturated salt solutions, thereby preventing precipitation on the membrane surface.
This proprietary formulation eliminates the use of hazardous acids, resulting in efficient plant operation with the highest possible conversion rate and offering a more cost effective alternative for reverse osmosis membrane protection than simple pH control or ion exchange softening.
The superior results achieved by RXSOL RO Scale Inhibitor allow engineers to design RO systems to successfully operate at higher recovery rates, giving a significant market edge.