Categories: Paint and Cleaning solvent-18
Product Short Description:

Can be used anywhere a protective coating will be applied to a metal substrate and extended coating service life

Product Description:

Rust Guard Rust Preventive Liquid is an inorganic corrosion inhibitor specially designed for temporary rust protection of ferrous metals after acid cleaning or rust removal processes. Formulated with a proprietory blend, Rust Guard Rust Preventive forms a thin, transparent, and adherent silicate film on metal surfaces that inhibits flash rusting caused by moisture and air.

Unlike oil-based rust preventives, RXSOL RustGuard Rust Preventive leaves no greasy or sticky residue and is ideal for parts that are to be painted, assembled, or stored indoors for short periods. The protective layer does not interfere with welding, machining, or further surface treatments.

This product is free from chromates, non-flammable, and environmentally safer, making it suitable for use in workshops, fabrication yards, and industrial process lines.

Product Application:

Typical Use Case of Rust Guard Rust Preventive

  • After acid descaling OR rust removal
  • As a passivation rinse in steel processing
  • For pipes, tanks, tools, flanges, and auto parts
  • In metalworking shops, shipyards, and fabrication plants
  • Temporary protection before painting or powder coating
Product Dose:

Application Instructions   ::: Coverage 100 Square footage coverage is dependent on concentration and process equipment used. 

 

 

Surface Preparation:

  • The surface should be clean, de-rusted, and free from acid residues or scale.
  • It is recommended to rinse with water after acid treatment and allow surface to dry slightly before application.

 

Dilution:

  • Dilute RXSOL RustGuard Rust Preventive SS to 10-20% in deionized or clean water.
  • For light-duty indoor protection: 5%
  • For humid storage or shipping: 15-20%

 

Application Methods:

  • Spray, brush, or dip the metal parts in the diluted solution.
  • Ensure full coverage and allow to air dry naturally.
  • Do not rinse off after application unless protection is no longer required.

 

Drying Time:

  • Surface-dry in 10–30 minutes at room temperature.
  • Drying can be accelerated with gentle warm air (below 60°C).

 

Removal (if required):

  • Wash off with water or wipe with a damp cloth.
  • For complete removal, RXSOL Alkaline Cleaner can be used.
Product Note:

Feature

Benefit

Prevents Flash Rust

Stops oxidation immediately after acid pickling or rust removal

Non-Oily, Dry Film

Suitable for painting, machining, or further treatment

Chromate-Free

Environmentally safer, worker-friendly, non-toxic alternative

Water-Based and Non-Flammable

Safe to handle, store, and apply

Easy Application

Can be sprayed, dipped, or brushed onto metal surfaces

Improves Paint Adhesion

Forms a silicate anchor layer that helps bonding of primers and paints

Low-Cost, High-Coverage

Economical to use even at low concentrations

Short-Term Rust Protection

Ideal for transit, intermediate storage, or process delay protection

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates